Features
Usage
Effects
# Features
· Stain-resistant
· Oil-resistant
· Self-cleaning performance
# Usage
1. The polished stone must be dry, and the surface should be cleaned to remove dust, oil, or other contaminants. Ensure good ventilation at the construction site.
2. Use spraying, brushing, or immersion methods to evenly coat the surface, applying in a crisscross pattern without missing spots. After brushing, there should be a certain amount of protective agent on the stone surface for absorption and penetration. Each liter of crystal silicon can treat 8-30 square meters of stone (depending on the stone’s absorption rate and surface condition).
3. The polished stone treated with crystal silicon will have protective effects after 5 hours at room temperature. Allow to air dry or cure at room temperature for 24 hours to form a stable hydrophobic layer (the best protective effect is achieved after natural curing for a week). Do not expose to rain within 8 hours.
4. The suitable construction temperature for this product is between 5℃ and 35℃. In summer, prevent excessive exposure of the bottom surface of the polished stone to sunlight, which can cause the surface temperature to exceed 50℃; otherwise, rapid drying will increase the amount of agent used and hinder the penetration of the coating.
5. The original sealed storage period is three years. After three years, the protective effect remains unchanged after testing, and it can still be used.
Precaution
1. Storage temperature should be above 0 degrees Celsius and below 45 degrees Celsius.
2. Avoid contact with skin/eyes; protective measures are recommended.
3. Do not ingest; store in a cool, dry place, out of reach of children.
# Effects
