Features
Usage
Effects
# Features
· Stain-resistant
· Oil-resistant
· Self-cleaning performance
# Usage
1. Clean the exterior wall surface thoroughly, removing dust, grease, or other contaminants. If cleaned with acidic cleaners, it needs to be neutralized with alkaline agents, and any residual cleaning agents must be completely removed before use. Keep the exterior wall surface as dry as possible (surface moisture does not affect usage).
2. Evenly coat the surface using spraying, brushing, or soaking methods, applying in a crisscross pattern without missing any spots. After brushing, there should be a certain amount of protective agent on the stone surface for absorption and penetration. Reapplying while the surface is still damp yields better results. One liter of protective agent can treat 8-30 square meters of stone (depending on the stone’s absorption rate and surface condition).
3. Stones treated with exterior wall crystal silicon will have protective effects after 2-3 hours at room temperature. Allow to air dry or cure at room temperature for 24 hours to form a stable hydrophobic layer (the protective effect is best after natural curing for a week). Do not expose to rain within 8 hours.
4. If exposed to rain during use, a reapplication is recommended. The suitable construction temperature for this product is between 5℃ and 35℃. In summer, prevent excessive exposure of the stone’s bottom surface to sunlight, which can cause the surface temperature to exceed 50℃; otherwise, rapid drying will increase the amount of agent used and hinder the penetration of the coating.
5. The original sealed storage period is three years. After three years, if tested, the protective effect remains unchanged, and it can still be used.
Precaution
1. Storage temperature should be above 0 degrees Celsius and below 45 degrees Celsius.
2. Avoid contact with skin/eyes; protective measures are recommended.
3. Do not ingest; store in a cool, dry place, out of reach of children.
# Effects
